Seeed SD Card shield V4.0 Manual

Page FAQ
SD Card shield V4.0
Contents
1 Introduction
Navigation
2 Features
Getting Started
3 Specification
Learning
4 Interface Function
Product
5 Usage
Arduino
5.1 Hardware Installation
Shield
5.2 Upload the program
Grove
6 Resources
Kit
Xadow
Introduction
Mbed
This is the new-released SD card V4.0 shield. It provides a storage space for your Arduino. Users can read/write SD card via Arduino's
built-in SD library. It supports SD, SDHC and Micro SD cards. It will only occupy the SPI port of your Arduino. Comparing to previous
Support
versions, it combines the standart SD slot and the Micro SD slot into a standard one, the included adaptor enables using of Micro SD
Forum
cards . You can stack on other shields that work with the unused pins. Additionally, the preformed I2C and UART port facilitates your
Wish
connection with Grove modules.
SeeedStudio
Taobao
Toolbox
What links here
Related changes
Special pages
Printable version
Permanent link
Features
Stand SD card
UART Grove & I2C connection compatible
Fully supported SD Library
Minimal number of SPI port
Truly stackable
Specification
Interface Function
Read
[hide]
、
SDHC card and TF card compatible
Item
Voltage
Current
Supported Card Type
Dimension
Net Weight
View source View history
Search
Create account Log in
Go Search
Min Typical
3.5 5.0
0.159 100
SD card(<=16G); Micro SD card(<=2G); SDHC card(<=16G)
68.7x53.5x19.00
14.8
converted by Web2PDFConvert.com
Max Unit
5.5 V
200 mA
/
mm
g