CMT PTC-1 Setup & Instructions For Use

PTC-1
A
= Handle
B
= Left L
= Anti Slip
Side Base
Material
Some assembly is required. Position and attach the handles as indicated in the
above image [A]. The Small Stock Hold Down Pins [F] can be pre-installed and
are fully adjustable using the socket-head screw and washer [G]. The pins can be
loosened, raised or lowered depending on the thickness of the stock being used.
SAFETY FIRST
Please read and fully understand any and all safety materials that came with your power tools or machinery before operation.
Always follow the power tool manufacturer's instructions for proper tool handling, operation and maintenance.
SMALL STOCK HOLDER
FOR USE WITH SMALL STOCK ON ROUTER TABLE
F
= Stock Hold Down Pins
C
= Adjustable
Center Base
Turn off Power Ear Protection
G
= Socket Head
Screw & Washer
E
= Quick
Release
Button
Eye Protection
C.M.T. UTENSILI S.p.A.
Via della Meccanica
61122 Pesaro - Fraz. Chiusa di Ginestreto - Italia
Tel. #39 0721 48571 / Fax #39 0721 481021
e-mail info@cmtorangetools.com www.cmtorangetools.com
A
= Handle
H
Adjustment Knob
D
= Right
Side Base
Respiratory CAUTION Sharp
Protection
= Center Base