Important Safety Instructions - Remington R3130 Manual

360 flex & pivot rotary shaver

Hide thumbs Also See for R3130:

Use and care manual (12 pages)

Use and care manual (21 pages)

Manual (111 pages)

Table Of Contents

Table of Contents

Available languages

ENGLISH

CLEANING DAILY

Ensure the shaver is switched off and unplugged from the mains.

Open the shaver head by pressing the release button on the front of the shaver (Fig. I).

Tape out excess hair shavings (Fig. J).

Close head assembly (Fig. K).

CLEANING MONTHLY

Perform the daily cleaning steps ﬁrst

Grasp plastic case around outer cutter and rotate toward the small dot on the shaver head

(Fig. L).

Pull outer cutter up and off the head assembly and remove inner cutter repeat steps 1-2

for the remaining cutters (Fig. M).

Brush hairs from inner and outer cutter (Fig. N).

Replace inner cutter (Fig. O).

Replace outer cutter by lining up the locator with the small dot (Fig. P).

Twist towards large indent to lock in place. Repeat steps 4-6 remaining cutters (Fig. Q).

CAUTION:

Never submerge your shaver in water.

CLEANING TRIMMER

Lubricate the teeth of the trimmer every six months with one drop of sewing machine oil.

WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE,

OR INJURY TO PERSONS:

An appliance should never be left unattended when plugged in to a power outlet, except

when charging.

Keep the power plug and cord away from heated surfaces.

Make sure the power plug and cord do not get wet.

Do not plug or unplug the shaver with wet hands.

Do not use the product with a damaged cord. A replacement can be obtained via the

Remington

Charge, use and store the product at a temperature between 0°C and 32°C.

Only use the parts supplied with this appliance. Use of non Remington parts with this

product may give rise to a hazardous condition.

Do not submerge or place under running water.

Keep this product out of reach of children. The use of this appliance by persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge can

give cause to hazards. Persons responsible for their safety should give explicit instructions

or supervise the use of the appliance.

080144_REM_IFU_R3130_18L.indd UK3