Advertisement
2
INSTRUCTIONS - INTERFIT
Projector Bracket
OPTIONAL ACCESSORIES AVAILABLE
TRIM KIT "THOUGH CEILING" MID-POLE STYLE
For when the mounting post runs straight through the
plaster ceiling and onto a structure above, small circular trim
piece, with grub screw attachment, to cover the cut
edge of the hole.
EXTRA LONG SPIDER ARMS
The standard spider arms can achieve projector coverage
of 160mm from centre-point (320mm Diameter), these extra
long arms give 220mm from Centre-point (440mm Diameter)
for those extra big projectors. Just loosen the Allen Key bolt
that runs through the Projector Mounting Head and the arms
simply slid out to be replaced with the longer versions, then
re-tighten Allen key bolt.
WIDE COLLAR
Designed to replace standard ceiling plate collar, when the
post is cut down on-site. This collar is designed to square up
the post assembly which may not be able to be cut square
on-site, by hand. Simply unscrew (6 screws) to ceiling plate
and collar assembly and swap the collars over to receive the
newly cut post.
Advertisement
