Advertisement
Under the Table Top - detail
Table Top sitting on the Frame but not clamped
Screw
(black plastic top)
Mounting Bracket
shape fits Frame
Fully clamped up
Tighten the Screw
(black plastic top)
to clamp the Top to the Frame.
This makes the table rigid.
Ensure the Screw is tight.
e a t e r
.co.uk
Threaded hole in Frame
to align with Screw
Hint - fitting the Table Top to the Frame:
Ensure the Table Frame is fully open and look
underneath to ensure the Mounting Brackets are
aligned with the Frame so the Screws can be
screwed into the threaded holes and tightened.
Guide Rail fits around
Top Bar of the Frame
Page 3 of 6
November 2013
Advertisement
