Advertisement
Under the Table Top
Mounting brackets with Screws
(with black plastic tops) for
holding to the frame
The Table Frame Unfolded
e a t e r
.co.uk
Guide Rail fits around
Top Bar of the Table Frame
To adjust height:
• If top is fitted, loosen the Mounting
Bracket Screws before adjusting height
• Loosen Screw (with black plastic top)
• Press in Spring Plunger with flat of
thumb. TAKE CARE not to push finger
in too far as it could get trapped.
• Adjust height ensuring Spring Plunger
engages with a hole in the Frame
- one hole at a time each side
• Ensure all Screws are retightened
• Retighten the Mounting Bracket
Screws holding the Top.
Page 2 of 6
November 2013
Advertisement
