Page 1
The Airthings Wave Mini provides you with detailed information about airborne chemicals, humidity, temperature, as well as mold risk indication. Wave Mini is a great way start monitoring the quality of your air, for a healthier home. Get started by connecting to the Airthings Wave App.
Device Specifications Wave Mini Specifications 1. Glow signal 2. Wave sensor 3. Battery compartments (3 AA batteries inserted) 4. Individual serial number 5. Device stand Communication Dimensions & Weight 80 x 80 x 26 mm Bluetooth low energy (3.1 x 3.1 x 1”) Airthings Smartlink 135g (4.8oz)
Page 4
Use the handy stand, or attach it to the wall using the mounting plate and a screw. The placement of the Wave Mini depends on how you would like to use it. If you are using it as a mold risk indicator, the Mini should be placed where mold is most likely to grow. (Go to airthings.com/mold-risk-indicator for more info.) If you are using the device for overall air...
Green means good, yellow means fair, and red means poor. Airthings Wave App Your app will update automatically when your smartphone is in range of your Wave Mini. Or you can manually update when you open the app and are in Bluetooth range. The Airthings Wave App includes sensor values, historical graphs, and long and short term averages.
My app is not updated when running in Open your phone settings and verify that background mode the Airthings Wave App is running in the background. You can usually find this in the app manager section of your phone settings.
What is the 7-day calibration period? When first pairing your Wave Mini you will see an alert showing the sensors are calibrating. While the temp and humidity sensors work within minutes, the VOC sensor will calibrate itself...
Regulatory Information Regulatory information Canada Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference;...
Page 9
Do not disassemble. If the detector does not work as specified or you are in doubt, contact your local dealer or visit us at Airthings.com. Use a dry cloth to clean the detector. When replacing the batteries, pay attention to the polarity marks. Always snap the mounting bracket to the detector’s rear side to protect the batteries, even when the detector...
Page 10
It is recommended to keep the instruments constantly activated and the batteries in place until drained. Airthings AS shall not be liable for damages related to failure or loss of data arising from incorrect operations and handling of the instruments.
Need help?
Do you have a question about the Wave Mini and is the answer not in the manual?
Questions and answers