Step 3: Preparing The Battery Pack - Sony SPP-206 Operating Instructions Manual

Step 3
Preparing the battery pack
Insert the battery pack into the handset, then place the handset on the
base phone.
1
2
Black
Red
3
4
CHARGE lamp
Slide open the battery compartment
lid of the handset.
Connect the battery connector with
correct polarity (black and red cords).
Insert the battery pack. Then close the
lid.
Place the handset on the base phone.
The CHARGE lamp lights up when
the handset is properly seated on the
charge terminals of the base phone.
Charge the battery pack for more than
12 hours so that the battery is fully
charged.
continued
11
EN
Getting Started