Safety Instructions - JBL ProTerra TempSet Heat Manual

Warnings:
Caution, fire hazard!
Do not cover the appliance!
Minimum distance between the spotlight and the animals or combustible sub-
0.5m
stances: 0.5 m

Safety instructions:

Please read and observe the Instructions for Use and keep them in a safe place
for later reference.
1. Make sure that the operating voltage indicated on the name-plate agrees with the
mains voltage.
2. Only for use with ceramic heat lamps up to 150 W, e.g. JBL ReptilHeat.
3. When changing bulbs, always disconnect the power plug and allow the bulb and
the bulb holder to cool off first. Use ceramic heat lamps of the above-mentioned
type only.
4. When screwing the bulb in and out, always make sure to hold the bulb holder with
one hand in order to prevent the cable from twisting.
5. The appliance is for indoor use only.
6. The appliance may not be used for any purpose besides that indicated in the In-
structions for Use.
7. The mains lead of the appliance must be placed in such a way that it is out of reach
of the animals.
8. If the mains lead or the TempSet heat itself is damaged, it may not be used.
9. If the mains lead is damaged, please consult an electrician or the manufacturer.
10. Both the ceramic heat lamp and the appliance itself must be kept free from dust
and dirt particles.
11. Always disconnect the appliance from the mains when carrying out repairs or
maintenance work.
12. This appliance may only be repaired by a qualified person.
8