•
The USB port does not support connection with USB extension cable and is not designed for commu-
nication with computer directly.
•
To remove the USB pen drive, turn off the power or switch the function mode to either Aux or FM fi rst.
For USB port – un-plug it by pulling out from the USB socket directly.
MP3 track format requirements:
Bit rate: 32 kbps~320kbps
Sampling rate: 32kHz, 44.1kHz, 48kHz
•
Set the main Function selector (3) to BT mode.
•
The BT LED indicator (12) will be fl ashing indicating BT is not connected.
•
Switch on the BT feature of your BT device (such as mobile phone) and select "DURAMAXX".
•
Once the connection is established, the BT LED (12) will light up.
Connect another audio device, e.g. (portable) CD player, MP3 player, (portable) cassette player, iPod, etc.
to this system with a 3.5mm audio cable (not supplied). Connect one end of this cord to the headphone
jack of the external device and the other end to the aux-in jack (9) at the side of the unit. Then press
Function button (3) to "AUX" mode. Start to playback your external device to enjoy your music.
According to the European waste regulation 2002/96/EG this symbol on the product
or on its packaging indicates that this product may not be treated as household was-
te. Instead it should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correct-
ly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailled information about recycling of this product, please
contact your local council or your household waste disposial service.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
2014/53/EU (RED)
Environment Concerns
Declaration of Conformity
BT
AUX
10