Connecting The Tool - Makita DVC265 Instruction Manual

Hose band
Hose band can be used for holding the hose or free
nozzle.
To secure the hose to the vacuum cleaner body, pass
the hose band through the slot on the body. You can
attach the hose band on either side.
► 1 . Hose band 2. Slot 3. Hose
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Assembling hose
Insert the hose cuff into the vacuum cleaner body and
turn it clockwise.
► 1 . Hose cuff 2. Vacuum cleaner body
1
2
3

Connecting the tool

If the bent pipe assembly is attached to the hose,
loosen the sleeve of bent pipe assembly and remove it.
1
► 1 . Hose 2. Bent pipe assembly 3. Sleeve
1. Attach the front cuff to the hose for dust extraction.
When connecting the front cuff, make sure that it is
securely screwed on the hose.
2.
Connect the front cuff to the tool's extraction
outlet.
1
► 1 . Front cuff 2. Extraction outlet 3. Hose
The front cuff can be detached by turning it counter-
2
clockwise while holding the hose.
NOTE: Always use a suitable front cuff. When using
the front cuff 24, attach it to the front cuff 22 that is
connected to the hose.
1
► 1 . Front cuff 22 2. Front cuff 24
8 ENGLISH
2
3
1
2
2