Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for TyloHelo SaunaChrome
Summary of Contents for TyloHelo SaunaChrome
- Page 1 SaunaChrome™ White LED Control Installation and User Manual 4215-128 Rev 1 TyloHelo Inc. Page 1...
- Page 2 SaunaChrome™ White LED Control Kit Installation Carefully unpack and inspect your kit to verify the correct components are included. Verify that the serial number on the back of your control matches the one located on the back page of this manual. The base White kit comes with a “single color”...
- Page 3 Attach the 12v LED output cable as shown at right (if not already done at the factory) The brown wire will connect to the “L-“ position. The White with orange stripe wire will connect to the “L+” position. 4215-128 Rev 1 TyloHelo Inc. Page 3...
- Page 4 (ie; poured concrete or block wall), a plastic vapor-resistant box and a metal box for use with conduit are available from TyloHelo. Determine the location for your touch control and mark the location with a 3” x 3” “box”.
- Page 5 When satisfied with the fit of the enclosure in the sauna wall, push the two black tabs outward and pull each forward until they make contact with the back of the wall surface. 4215-128 Rev 1 TyloHelo Inc. Page 5...
- Page 6 Remove the glass touch panel from the touch control by carefully inserting a small flat-blade screw driver into the slot as shown above and use a twisting/prying action to separate the glass from the control. 4215-128 Rev 1 TyloHelo Inc. Page 6...
- Page 7 Do not over-tighten the screws! Snug them until the panel is firmly held in place. Be sure to orientate the panel with the red LED located at the upper left corner, as shown above. 4215-128 Rev 1 TyloHelo Inc. Page 7...
- Page 8 Be sure to orientate the glass panel with the small clear “window” aligned with the red LED on the control panel. The power icon should also be correctly orientated with the vertical line in the 12:00 position. Correctly orientated panel shown above. 4215-128 Rev 1 TyloHelo Inc. Page 8...
- Page 9 This splitter can be located in any convenient location such as on top of your sauna or in an adjacent utility room. Never locate the splitter inside sauna cabin UNLESS you are enclosing it inside a water-tight junction box! 4215-128 Rev 1 TyloHelo Inc. Page 9...
- Page 10 Static Power Consumption: <1W Warranty TyloHelo Inc. will warrant any component of the SaunaChrome™ light system for a period of 1 year from date of purchase when used as instructed in a sauna environment. Any other use may void the warranty.
- Page 11 4215-128 Rev 1 TyloHelo Inc. Page 11...
- Page 12 4215-128 Rev 1 TyloHelo Inc. Page 12...
- Page 13 8 strip lights = 8 watts + 2 MR16 bulbs = 1 watt + 1 Mini-spot = 1 watt Total Watts = 10w The available transformers from TyloHelo are either the APV-8-12 (8 watt) or APV-60-12 (60 watt) so in this example we will need to use the APV-60-12. Our Technical Support and Sales Staff will help you select the correct transformer for your project needs.
Need help?
Do you have a question about the SaunaChrome and is the answer not in the manual?
Questions and answers