MyRepublic Wi-Fi Hub+ Quick Start Manual

Welcome to MyRepublic
Please wait until you have received an SMS or email
advising you your service is active. Once you have received
this - follow our step by step guide.
What is in the box
Wi-Fi Hub+ Quick Start Guide
Power Adaptor Grey Telephone Cable
Yellow & Red Ethernet Cable Yellow Ethernet Cable
2.4GHz Wi-Fi Network Name: MyRepublic XXXX
5GHz Wi-Fi Network Name: MyRepublic XXXX-5GHz
Wireless Key: XXYY123
Wi-Fi Security Card
MyRepublic Quick Start Guide
Getting to know your Wi-Fi Hub+
Front panel
The LED lights on your Wi-Fi Hub+ will indicate the status
of you service.
LED Indicator
LED lights (on/off) button
Broadband
Internet
Wi-Fi 2.4Ghz
Wi-Fi 5Ghz
WPS
LAN
USB
Voice
Wi-Fi (on/off) button
Back panel
The back ports are colour coded so it is easy to see which
cables connect to which port.
Voice Ports
DSL Port
Side panel
Icon
A USB port and WPS button can be found on the side
panel.
USB port: Connect a USB device to share your content on
your home network.
WPS button: Hold down the WPS button on the Wi-Fi
Hub+ to connect your Wi-Fi devices password free. Your
device must have WPS functionality. Once your device
is connected remember to press the WPS button on the
Wi-Fi Hub+ to turn off the WPS session so no unauthorised
devices access the connection.
USB Port
Power Button
LAN Ports WAN Port
Power Inlet
Reset Button
WPS Button