1. Manuals
  2. Brands
  3. Medema Manuals
  4. Wheelchair
  5. MC 1124
  6. Service manual

Medema MC 1124 Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
medemagroup
GB
2433-2007-S ver. 1.0.2 - January 2020

Advertisement

Table of Contents
loading

Related Manuals for Medema MC 1124

Summary of Contents for Medema MC 1124

  • Page 1 medemagroup 2433-2007-S ver. 1.0.2 - January 2020...
  • Page 2 Medema Production A/S For this product You can expect to find the following documentation: • User manual • Service manual • Spare parts list • Presell information. Medema Danmark A/S Enggårdvej 7 Snejbjerg DK-7400 Herning Denmark Telefon: +45 70 10 17 55 Mail: info@medema.com...

  • Page 3: Table Of Contents

    Flame resistance ..............8 Declaration of conformity ............. 9 Medema A/S Warranty ............10 Part names ................11 Part names MC 1124 - Spinalus..........12 Serial number................. 13 Driving the MC 1124 .............. 14 Safe servicing ................ 18 Tool list ................... 19 Parts Joystick R-net ..............
  • Page 4 Medema Production A/S Swing-away fitting ..............67 Adjusting the ION seat ............72 Replacing the motor gear ............. 73 Replacement of coal in the motor ........74 Replacing hoist / tilt .............. 75 Fuses ..................76 Joystick R-net and the power module ......... 77 Motors and the power module ..........

  • Page 5: Introduction

    It is what is called a Class B vehi- cle according to the European classification of electric wheelchairs. MC 1124, and any assistive product are designed for safe travel for at least 10 years, up to a max. of 5,000 hours, provided it is serviced and safety-checked every third year, corresponding to 1500 hours of op- eration.

  • Page 6: Intended Occupant

    You can find manuals for all our products on our web page www.medema.dk. Or contact Medema A/S, and we can send the manuals in a mail for you. Find the contact information on page two in this manual.

  • Page 7: Symbols

    For safety reasons the vehicle must not be lent to persons who are not completely familiar with it. The vehicle is designed for one person only. The MC 1124 has been designed for users weighing max. 150 Joystick The joystick control box must not be exposed to extremes of temperature or kept in a damp environment for extended peri- ods.

  • Page 8: Seat And Backrest

    Medema Production A/S Seat and backrest The cover of the seat and backrest can be washed in the wash- ing machine. ALWAYS follow the washing instructions on the back of the seat pad / backrest. Flame resistance The Mini Crosser seat’s flame resistance has been tested in...

  • Page 9: Declaration Of Conformity

    Medema Production A/S Declaration of conformity Medema A/S hereby declares that: Machine: Electric mobility wheelchair Use: Transport of walking-disabled people Model No: MC 1124 Complies with the Medical Device Directive 93/42/EEC The product is accredited according to standard DS/EN 12184 - Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods.

  • Page 10: Medema A/S Warranty

    The warranty does not cover freight costs. The warranty requires inspection according to the intervals specified in the technical specifications. Service and mainte- nance must be carried out by Medema authorised profession- als. Service manual 2433-2007-S 10 of 98...

  • Page 11: Part Names

    Medema Production A/S Part names The part names given below refer to the descriptions later in the instruction manual. Headrest Adjusting the headrest Control panel Joystick Armrest Charging socket Release for Swing-away leg supports Eye for restraints Footplate or footrests...

  • Page 12: Part Names Mc 1124 - Spinalus

    Medema Production A/S Part names MC 1124 - Spinalus The part names given below refer to the descriptions later in the instruction manual. Headrest Adjusting the headrest Control panel Joystick Armrest Charging socket Swing-away Eye for restraints Footplate or footrests...

  • Page 13: Serial Number

    Medema Production A/S Serial number All wheelchairs have a serial number plate showing the year of production, month and serial number. The same serial number can also be found on page two of the User Manual. Please quote this number when making inquiries about servicing, spare parts, etc.

  • Page 14: Driving The Mc 1124

    Avoid placing your full body weight on the footrests. This may tip the wheelchair forwards. If you are using the MC 1124 for the first time, you should try out all the day-to-day situations you are likely to encounter: •...
  • Page 15 If you have to stop, start up again slowly. When driving downhill, you must drive at the slowest speed. If the MC 1124 starts moving faster than you want, stop it by completely releasing the joystick. Carefully push the joystick forwards again and carry on with care until you reach the bot- tom of the hill.
  • Page 16 Not to be used for towing other vehicles, etc. Note! Talk to your doctor if you are taking medicine that may affect your ability to drive motorised vehicles. Do not drive the MC 1124 when intoxicated. This applies to both medicine and alcohol. 6° Service manual 2433-2007-S 16 of 98 Version 1.0.2/2020...
  • Page 17 Note! You should assume that other road users cannot see you while you are sitting in the MC 1124. So take great care and wait for the road to clear before crossing. Driving on stairs/escalators:...

  • Page 18: Safe Servicing

    Medema Production A/S Safe servicing • To avoid injuries to both the service engineer and the subsequent user of the MC 1124, it is important to get to know the product before servicing it. • Be particularly aware of the following: •...

  • Page 19: Tool List

    Medema Production A/S Tool list The following tools are needed to service the MC 1124: • Circlip pliers • Allen keys (mm) • Allen deys 9/64 (inch) • Box spanners, 7-17 mm • Open-ended spanners, 7-17 mm • Torx screwdrivers, 10/20/25/30 and 45 slut.

  • Page 20: Parts Joystick R-Net

    Medema Production A/S Parts Joystick R-net Joystick R-net Start/stop button Horn Lights (Extra) Profile-button Indicator right (Exstra) Speed selection Hazard warning lights (Exstra) Display Mode-button Indicator left (Exstra) Joystick Service manual 2433-2007-S 20 of 98 Version 1.0.2/2020...

  • Page 21: Using The Joystick R-Net

    Medema Production A/S Using the Joystick R-net Speed selection with joystick R-net To start the wheelchair: Press button 1 and wait for the battery indicator to stabilise (3-5 seconds) Select the maximum speed: Keep pressing button Speed selection to maximize or minimize the maxi- mum speed.
  • Page 22 Medema Production A/S LCD Screen Top bar Main screen area Base bar Symbol Description Shown in the top bar. Color red, yellow and green - fully charged. Color red and yellow - ok, but need to be charged soon. Color red, steady - ok, but charge as soon as possible.

  • Page 23: Mode

    Medema Production A/S Mode Mode Description Displays the sections of the chair currently selected for movement. When Bluetooth Mode is entered the following screen will be displayed. When the control system requires a reboot, this symbol will be flashed. Waiting symbol. This symbol is displayed when the control system is changing between different states.

  • Page 24: Settings Menu

    Medema Production A/S Settings menu Set Time The menu is accessed by depressing the Speed Down and Speed Up buttons simultaneously (Pos 7 and 8 in the table Designations - buttons). A right joystick deflection will enter a clock adjustment screen in which further joystick deflections are used to set the time.
  • Page 25 Medema Production A/S The following possibilities appears: 12hr, 24hr or OFF. Deflect the joystick to the right /left to choose the menu you want. Choose Exit Set Distance This sets the functionality of the odometer and a screen as be- low will appear.
  • Page 26 Medema Production A/S Set Backlight This sets the intensity of the LCD backlight. The adjustable range is 0% to 100% in steps of 10%. Adjust- ments are made with left and right joystick deflections. Set Background The standard setting from the factory is blue. But in bright sun- light, the white background can be better.
  • Page 27 Medema Production A/S Infra red For full details on how to learn, delete and use the IR functions available please contact Medema A/S. Exit Leave Settings and go back to normal use by choosing Exit. Adjusting seat and footrest Turn on the joystick and press the Function button (Mode) Use the joystick left/right to select the function you want to adjust.

  • Page 28: Safety Check

    Check the tyre pressure at least once a month. It should be 2,4 bar. Service check MC 1124 is designed for safe travel for at least 10 years, up to a max. of 5,000 hours, provided it is serviced and safety- checked every third year, corresponding to 1500 hours of op- eration.

  • Page 29: Troubleshooting

    Troubleshooting Trouble Possible causes Remedy MC 1124 will not The MC 1124 is not turned Turn the MC 1124 on I/O but- run. on (I/O button) ton). There is no light in the battery indicator. The batteries are dis- charged.
  • Page 30 Push the charger plug in. indicates a fault. been inserted. There is a mains fault. Contact supplier. Status light flashes The MC 1124 is disen- Switch off the chair and activate with 9 flashes per gaged when it starts. the parking brake. cycle.

  • Page 31: Led Errors

    Medema Production A/S LED errors If a system trip occurs, you can find out what has happened by counting the number of LEDs on the battery gauge that are flashing. Below is a list of self-help actions. Try to use this list before you contact your service agent.

  • Page 32: Programming

    Medema Production A/S Programming The electric control in the MC 1124 can be programmed so that it meets the typical customer’s needs. From the factory the vehicle is programmed in default configura- tion, so that smooth acceleration, proper braking and sensitivity are guaranteed.

  • Page 33: Maintenance

    Medema Production A/S Maintenance MC 1124 is designed so that it requires very little care and maintenance. General care If you get food or drink, etc. on the control unit, you should wipe it with a damp cloth. You must only use a damp cloth to clean the MC 1124.
  • Page 34 NEVER use a high-pressure cleaner or hose. It may damage the MC 1124’s electronic system. During drying MC 1124 must stand on a flat surface. It should be indoors, preferably in a heated room. The temperature must not exceed 50°.

  • Page 35: Batteries

    Red indicates that the batteries need to be recharged as soon as possible, otherwise the wheelchair will cut out. The MC 1124’s batteries should be charged while not in use. This extends the service life of the batteries. The MC 1124 is supplied with sealed, maintenance-free bat- teries that do not normally generate gas and do not need to be topped up with water.

  • Page 36: Charging

    Please note that the capacity of the batteries will reduce over time and at low temperatures. Battery capacity at -10°C is half that at +20°C. If the MC 1124 is not going to be used for an extended period, charging once a month will suffice. Note! The charger must NOT be placed on the seat during charging.

  • Page 37: Checking The Battery Poles

    Medema Production A/S Checking the battery poles Check that the cable shoes are properly mounted on the poles. If necessary, tighten the screws. Battery poles Replacing batteries Swing split legrests to the side, and if central footplate, adjust it in the highest possible position. Raise the seat to highest posi- tion and turn the chair off.
  • Page 38 Medema Production A/S Dismantle the poles on the old batteries, Place the batteries with the poles against and mount them on the new ones. each other. Place the battery box on top, and turn it Make sure that the plug is nearest the around.

  • Page 39: Light

    Medema Production A/S Light Light - direction The direction of the light can be adjusted by: - loosen the screw - turn the lamp in the desired direction. - tighten the screw again. Adjusting screw Tool: Allen 5 Light - located in the C-rail...

  • Page 40: Bag Holder

    In addition, the work- bench or table must be fastened to the floor. Lift the MC 1124 with a jack, lift or similar to free the wheels from the base. Make sure the chair is stable.

  • Page 41: Checking The Pivot Wheel

    Medema Production A/S Checking the pivot wheel Place a piece of wood or similar beneath the chassis to lift the wheel clear of the ground. Washer Check the bearings (Pos 8). If there is play in the wheel, try to tighten the nut in the top.

  • Page 42: Checking The Drive Wheel

    Medema Production A/S Checking the drive wheel Place a piece of wood or similar beneath the chassis to lift the wheel clear of the ground. Dismount the five screws in the cover. The wheel can now be removed. Mounting in reverse order.

  • Page 43: Checking The Disengagement

    The MC 1124 is equipped with two disengagement levers. One on each motor. Note! You must NEVER brake the MC 1124 by switching off with the I/O button while moving, as this applies the magnetic brake with considerable force, with a resulting risk of tipping.

  • Page 44: Checking The Brakes

    Parking brake / magnetic brake: Has to be tested on a flat ground with minimum 1 meter free space around the chair. • Turn on the MC 1124, and move the joystick slowly forward, until a click is heard. (In this position the chair might start to move). •...

  • Page 45: Footplate/Footrest

    Medema Production A/S Footplate/footrest All the footrests are designed to stay safe to use for at least 10 years. Manual central footplate You can adjust the foot- plate forwards and back. Undo the two screws indi- cated on both sides.
  • Page 46 Medema Production A/S To adjust the footplate up and down, undo the screws shown here. You can now adjust the footplate to the required height. REMEMBER to tighten the screws properly again. Electric central footrest You can adjust the foot- plate forwards and back.
  • Page 47 Medema Production A/S Length adjustment: Switch to the seat func- tions setting by pressing the Mode button. Toggle between the set- tings by deflecting the joystick left / right. The icon for the left leg support starts flashing. Move the joystick up/down to change the length.
  • Page 48 Medema Production A/S Manual footrests You can adjust the foot- rests forwards and back. This can be done by undoing the two screws indicated. REMEMBER to tighten the screws again. To adjust the footplate an- gle, loosen the clip. Adjust and tighten the clip again.
  • Page 49 Medema Production A/S Gripping area The footrests can be swung to the side. To do this, press your fin- ger on the release handle. No tools are needed. To dismantle, press the release handle. Swing the footrest out, and pull upward.
  • Page 50 Medema Production A/S Adjusting the height and angle using the joystick: Switch to the seat func- tions setting by pressing the up/down button. Toggle between the set- tings by deflecting the joystick right /left. The icon for the left leg...
  • Page 51 Medema Production A/S You can adjust the height manually by undoing these screws, adjusting, then tight- ening again. You can adjust the angle of the footplates by undoing this screw, adjusting, then tighten- ing again. Electric central footrest - with split footrests Normal start position.
  • Page 52 Medema Production A/S Calf pads: Innermost position. Calf pads: Outermost position. Difference of 50 mm from the innermost to the outer- most position Hole pattern. Footplate can be moved, twice, 25 mm, on each. (50 mm total) Right and left footrest,...
  • Page 53 Medema Production A/S The footrests are here identical in top position Calf pads can be moved in 3 directions. A Tilts B 130 mm C 50 mm Footrests angle can be adjusted individually, using the screw as seen on the next picture.
  • Page 54 Medema Production A/S Footplate. Left and right. Footplate with: Width extension kit. Footplate with: Bell shape length exten- sion kit Footplate with: Width and length exten- sion kit Service manual 2433-2007-S 54 of 98 Version 1.0.2/2020...
  • Page 55 Medema Production A/S Connection of footplates: Right and left base plate is screwed together with the connecting piece so that they now act as one large foot plate. Service manual 2433-2007-S 55 of 98 Version 1.0.2/2020...

  • Page 56: Spinalus Back - Settings

    Medema Production A/S Spinalus back - settings Spinalus back 30 cm and 35 cm. Has no adjustment options. Simple access to adjusting through the four zippers on the back Spinalus 40 cm low. Can be adjusted in two places. Open the zippers and find the adjustment screws.

  • Page 57: Spinalus-2 Settings

    Medema Production A/S Spinalus-2 settings Spinalus-2 is designed to stay safe to use for at least 10 years Adjusting the height of the backrest The backrest can be ad- justed up/down in several sections. The top part of the backrest is, from the factory, mount- ed in the top hole.

  • Page 58: Stepless Adjustment Of Seat Depth

    Medema Production A/S Stepless adjustment of seat depth Seat depth are step less adjusted between 35 and 55 cm. Due to the construction of the back, the seat depth adjustment have no influ- ence on the other geometry in the backrest.

  • Page 59: Height Adjustment Of Armrest

    Medema Production A/S Height adjustment of armrest The armrests runs in a rail, can be adjusted step less up/down. To adjust - loosen three screws. Adjust armrest - tighten the screws again. Loosen these screws. Tool: open end wrench 13 mm Loosen these screws.
  • Page 60 Medema Production A/S Adjusting the armrest angle in the first joint The armrest has two joints to rotate about. We name the joints, the first and the second joint. The second joint. The first joint. Tool: Allen key 6 mm...
  • Page 61 Medema Production A/S By turning the screw either one or the other way, the angle of the armrest moves in/out. Note! When the armrest is adjust- Centre of angle ed inward, it will at some point, hit the seat. Centre of angle...
  • Page 62 Medema Production A/S Dismantling the armrest The armrests are fixed with a finger screw. Loosen the finger screw. Pull the armrest of. A new one can be mounted in reverse order. Gripping area Service manual 2433-2007-S 62 of 98 Version 1.0.2/2020...
  • Page 63 Medema Production A/S Adjustment of the seat width The Spinalus-2 seating sys- tem is full modular seating system from 40 to 55 cm in seat width. In steps of 5 cm. When changing from one seat width to another, all that need to be changed, is the cushions.
  • Page 64 Medema Production A/S The Spinalus-2 seating sys- tem is full modular seating system from 40 to 55 cm in seat width. In steps of 5 cm. Follow the instructions under- neath to change the seat width. 1: Release the back cushion.
  • Page 65 Medema Production A/S 4: Remove the cover plate in the back. Remove the four screws that keep the cover in place. 5: Loosen the actuator box. Loosen the actuator box by removing the two screws, that hold it in place. Now there is access to the pinole screws in the next step.
  • Page 66 Medema Production A/S The back actuator is fixed in both ends on a solid axle. To be able to adjust the seat width out or in the two pinole screws on each side of the axle, in the top and the bottom.

  • Page 67: Adjusting The Headrest

    The headrest is designed to stay safe to use for at least 10 years. Swing-away fitting The MC 1124 can be equipped with a swing-away fitting. To use it, push the joystick and you can move it to the side. Service manual 2433-2007-S 67 of 98 Version 1.0.2/2020...
  • Page 68 Medema Production A/S Adjusting the tightness Here you adjust how easyly the Swing away should re- act to the push, when you need it to swing away. Tool: Torx T10 Adjusting backward/forward on armrest Lift up the armrest. Two screws keep the Swing away bracket fixed to the armrest.
  • Page 69 Medema Production A/S Joystick height adjustment By loosening this screw, the joystick can be adjust- ed up / down, with center in this axis. Tool: Torx T30 Find the right location. And tighten the screw again.. Tool: Torx T30 This setting also affects how far the joystick folds under the armrest.
  • Page 70 Medema Production A/S Replace joystick The Joystick is attached to a bracket with two screws Remove the two screws, and unplug the plug. Mount a new in reverse order. Remember! To fix the cabel again with cable ties. Tool: Allen key 4 mm...
  • Page 71 Medema Production A/S In order to make the Swing away, swing to the other side, switch these two screws around. Tool: Torx T25 They have different length. The longest screw should be to the right if the Swing away is mounted on the right armrest.

  • Page 72: Adjusting The Ion Seat

    Medema Production A/S Adjusting the ION seat Adjust the angle of the back by pulling here. Move the back to a new position. It has to click in place in both sides to be locked in place. ® IX. Tension Adjustable Seat Back The back rest is easily 16"W x 22”H...

  • Page 73: Replacing The Motor Gear

    Medema Production A/S Replacing the motor gear Place a piece of wood or similar beneath the chassis to lift the wheel clear of the ground. Right Motor Mount Assy Left Motor Mount Assy Please note: The drive motor is equipped with the 5-spoke hub.

  • Page 74: Replacement Of Coal In The Motor

    Medema Production A/S Replacement of coal in the motor If the coals in the motor get worn, it is possible to exchange them. Follow the procedure below. motor is poke hub. Unmount the motor. See section Replacing the motor gear Motor coal Turn of the top cover.

  • Page 75: Replacing Hoist / Tilt

    Medema Production A/S Replacing hoist / tilt It is recommended to remove the seat before you start. Remove the seat plate. Four screws. Dismount the four eyes for belt attachment. Two screws each. The hoist / tilt is now free, and can be lifted away. A new one is mounted in reverse order.

  • Page 76: Fuses

    Medema Production A/S Fuses On the left of the MC 1124 behind the seat, there is a automatic fuse protecting the battery circuit. The fuse is white. If it pops out, you can push it back in again after a few minutes. If it immediately pops out again, contact your authorised dealer.

  • Page 77: Joystick R-Net And The Power Module

    Medema Production A/S Joystick R-net and the power module Motors and the power module Service manual 2433-2007-S 77 of 98 Version 1.0.2/2020...

  • Page 78: Securing To Vehicle Floor With Belts

    ALWAYS use four belts at the back and two at the front. The belts must always be attached to approved fittings in the vehicle and the four eyes welded to the MC 1124. The belts MUST be attached within the angles shown in the picture for optimum safety.
  • Page 79 Medema Production A/S Attachment point Attachment point 25˚ 10˚ Min. 150 mm Min. 150 mm on floor Centre line on floor Service manual 2433-2007-S 79 of 98 Version 1.0.2/2020...

  • Page 80: Dahl Docking System

    Medema Production A/S DAHL docking system Dahl Engineering’s electric Docking System sets completely new standards of flexibility and safety for wheelchair users. The testing proved that the docking station is strong enough to ocking System cope with a load equivalent to the wheelchair weight of over 200...

  • Page 81: Mounting The Docking Spear

    Medema Production A/S Mounting the docking spear The MC 1124 is prepared mounting of the docking spear, by predrilled holes in the chassis. To mount the docking spear: • Turn of the chair. • Dismantle the legrests if mounted. •...
  • Page 82 Medema Production A/S As the screws are to long meaning they are higher than the nuts, the have to be adjust- ed. Otherwise they can ruin the batteries. The plates in the bot- tom makes it possible to slide the batterybox over the nuts, in and out as before.

  • Page 83: Mounting The Drive Wheel

    Wheel hub for drive wheel, MC 1124 2403-1006 Rim complete MC 1124 2403-1110 Central hose 1120/1121/1122 (3.00-8) 2403-1007 Tyre for drive wheel, black MC 1124 air 2403-1008 Drive wheel complete, black MC 1124 air 2431-1010 Wheel nuts, 5 pcs. MC 1124 2403-1009...

  • Page 84: Footrest, Electric Adult

    Medema Production A/S Footrest, electric adult Art. No. Description CR-00870N Footrest electric adult, right, SB40-45 CR-00871N Footrest electric adult, left, SB40-45 CR-00878 Footrest actuator part, right CR-00879 Footrest actuator part, left CR-00874 Mounting Bracket f/footrest, right electric. CR-00875 Mounting Bracket f/footrest, left electric.

  • Page 85: Footrest, Manual Adult

    Medema Production A/S Footrest, manual adult Art. No Description CR-4-0002 Footrest manual adult, right, SB40-45 CR-4-0003 Footrest manual adult, left, SB40-45 CR-4-0010 Footrest top part, right manual CR-4-0015 Footrest top part, left manual CR-00874 Mounting Bracket f/footrest, right CR-00875 Mounting Bracket f/footrest, left...

  • Page 86: Footrest Actuator Part

    Medema Production A/S Footrest actuator part Art. No. Description CR-00878 Footrest actuator part right CR-00879 Footrest actuator part left 5-200-6-014 Legrest head left 5-200-6-015 Legrest head right CR-00890 Actuator part electric legrest complete 5-200-6-031 Spring for lock, legrest CR-00886 Knee protector, right...

  • Page 87: Mounting Bracket For Footrest

    Medema Production A/S Mounting bracket for footrest Art. No. Description CR-00874 Mounting bracket for footrest right CR-00875 Mounting bracket for footrest left CR-00889 Plug for legrest complete w/ cable SR-00022 C-rail mounting Service manual 2433-2007-S 87 of 98 Version 1.0.2/2020...

  • Page 88: Footplate

    Medema Production A/S Footplate Art. No. Description CR-00880N Footplate right SB40-45 CR-00881N Footplate left SB40-45 CR-00880 Footplate right SB35 CR-00881 Footplate left SB35 CR-00980 Footplate right SB50+ CR-00981 Footplate left SB50+ CR-00884 Footplate junior / child right CR-00885 Footplate junior / child left...

  • Page 89: Central Footplate, Adult, Electric

    Medema Production A/S Central footplate, adult, electric Art. No. Description CR-01200 Footplate for adult (out-in/up-down) CR-01212 Torque joint complete adult, right CR-01213 Torque joint complete adult, left CR-01232 Calf rest II complete, right CR-01239 Calf rest II complete, left 5-210-6-046...

  • Page 90: Central Footplate, Child, Electric

    Medema Production A/S Central footplate, child, electric Art. No. Description CR-01201 Footplate for child (out-in/up-down) CR-01214 Torque joint complete child, right CR-01215 Torque joint complete child, left CR-01202 Footmat for footplate adult/child CR-01208 Calf rest complete, child 5-210-6-046 Central footplate alluminium...

  • Page 91: Central Footplate Adult, Manual

    Medema Production A/S Central footplate adult, manual D E F Art. No Description C5-0037 Footrest, manual, adult CR-01203 Footplate incl. mat and pos A-F 5-210-6-046 Central footplate aluminium CR-01202 Mat for Central footplate aluminium CR-4-0020 Torque joint round Service manual 2433-2007-S 91 of 98 Version 1.0.2/2020...

  • Page 92: Central Footplate, Junior Manual

    Medema Production A/S Central footplate, Junior manual Art. No Description C5-0038 Footrest, manual, junior Cr-01204 Footplate incl. mat 5-210-06-022 Central footplate aluminium CR-01202 Mat for Central footplate aluminium CR-4-0020 Torque joint round Service manual 2433-2007-S 92 of 98 Version 1.0.2/2020...

  • Page 93: Swing-Away Joystick Mount (Adult)

    Medema Production A/S Swing-away joystick mount (adult) Art. nr. Beskrivning Antal 2406-1050 Swing-away joystick mount 2406-1012 Adjustment bracket for Swing away 2406-1007 Adjustmen bracket for armrest 2406-1039 Multi bracket for joystick 2406-1040 Bracket for joystick 2406-1047 Middle joint set for Swing away...

  • Page 94: Technical Data

    Medema Production A/S Technical data MC 1124 General information: Overall length with legrest (split legrest) Min. 1200 mm / Max. 1720 Overall length with legrest (central legrest) Min. 1200 mm / Max. 1720 Overall length without legrest Min. 900 mm / Max. 900 mm Overall width Min.
  • Page 95 Medema Production A/S MC 1124 Seat surface height at front edge (floor to top of 390, 430 or 450 mm seat frame) Spinalus-2 (not tilted) Backrest angle (Spinalus-2) Min 0° / Max 50° (**) Backrest height (Spinalus-2) 505 - 530 - 555 - 585 mm...
  • Page 96 Conforms cordance with ISO 7176-16 ISO 7176-19 Wheeled mobility devices for use Conforms as seats in motor vehicles. MC 1124 Crash tested with belts from Dahl Passed Engineering MC 1124 Crash tested with docking system from Passed Dahl Engineering.

  • Page 97: Seat Angles

    Medema Production A/S Seat angles -5° 50° -0° **** Optional -5° 45° Service manual 2433-2007-S 97 of 98 Version 1.0.2/2020...
  • Page 98 medemagroup...

Table of Contents