Setting The Clock; Setting The Alarm - Qudo QUDOC200BK Instruction Manual

Setting the Clock

1. The CLOCK button cycles through clock, alarm 1, alarm 2
with each short press.
2. To set the time press and hold the CLOCK button when
time is showing.
3. The hour digits will now flash. Press VOLUME + or VOLUME –
to set the required hour and press CLOCK to confirm.
4. The minutes will now flash. Press VOLUME + or VOLUME -
to set the required minutes and press CLOCK to confirm.
The clock setting is completed.

Setting the Alarm

1. Press the CLOCK button until AL1 icon is lit, Alarm time preview
will show.
2. Press once again AL2 icon is lit, Alarm time preview will show.
3. Press and hold the CLOCK button when on AL1 or AL2 for
3 seconds to start alarm setting.
4. The hour digits will now flash. Press VOLUME + or VOLUME –
to set the required hour and press CLOCK to confirm.
5. The minutes will now flash. Press VOLUME + or VOLUME -
to set the required minutes and press CLOCK to confirm.
6. The clock setting is completed.
7. OFF will now flash. Press VOLUME + or VOLUME - to select
ON /OFF and press CLOCK to confirm. Alarm is now set.
8. Select the rings of the alarm. After finishing he adjustment of
the minutes, short press the clock key, marks of 'OFF', 'ON' or
' ' and Alarm 1 would flash on LED screen, you are entering the
mode of alarm ring setting. Sort press the button of previous
track or next track, to select the ring of alarm. Short press the
clock key when the mark of 'OFF', 'ON' or '
the alarm ring is selected.
7/10
'is flashing, then