Related Manuals for Ziegler RM Series
Summary of Contents for Ziegler RM Series
- Page 1 Analogue Meters With Moving - Iron Movement RM12 ... 16 Analogue Digital Multimeter (User Manual) www.ziegler-instruments.com...
- Page 2 - - - TRMS 1000 V 300 mA 10 A fused 1000 V max (8) (9) (10) (11) DC AC DATA - . . . 8 8 8 8 kHz % (18) (12) (17) KW MW (19) (15) (14) (16) (13) www.ziegler-instruments.com...
- Page 3 Electric discharges and high frequency influence may cause incorrect measurement on electrical systems up to 1000 V with KS information to be displayed and block the measuring process Reset the measuring adapter. meter by switching it OFF and ON again otherwise check the battery connections. www.ziegler-instruments.com...
-
Page 4: Automatic Turn Off
The analog indicator has its own polarity indication When measuring the measuring range which gives the best resolution When switching to DC quantities the analog scale (15) has a negative range of scale frequency measurement and to ratio measurement the previously selected voltage measuring range is maintained. www.ziegler-instruments.com... -
Page 5: '' Data Hold Facility
With the function activated you can select the measuring ranges only By pressing the yellow multifunctionpushbutton for a long time manually if you switch to another range the stored MIN MAX values are clearance is acknowledged by the two sound signal. cleared. By switching the instrument OFF. www.ziegler-instruments.com... -
Page 6: Voltage Measurement On Electrical Systems Up To 1000V With The Ks30 Measuring Adapter
On the mA and A ranges ( A range for RM 13), an intermittent sound signal warns you when the measured value exceeds the upper range limit. The current measuring ranges upto mA are protected to a short www.ziegler-instruments.com... -
Page 7: Resistance Measurement
V. mA(9.1.1) V(9.1.2) 10. Resistance measurement Verify that the device under test is electrically dead External voltages would falsify the measured result! (6) " W." Set the function selector switch Connect the device under test as shown. www.ziegler-instruments.com | 15... - Page 8 OFF Repeated brief pressing of the multifunction pushbutton alternately switches the buzzer on and off When pressing the push button for a long time the buzzer is always switched OFF this is acknowledged by the buzzer sounding twice. www.ziegler-instruments.com | 15...
- Page 9 The correction value is retained as long as multimeter is The meter acknowledges this by two sound signals The voltage switched on. measuring range last selected is maintained. by operating the function selector switch.(6) www.ziegler-instruments.com | 15...
- Page 10 In traces (XY and Yt)as on a channel recorder In tabular form (data logger upto channels) The measured data is stored in ASCll format for further processing. For the use of com ,100 the following requirements must be met www.ziegler-instruments.com | 15...
- Page 11 ... + 40 RM 13 (Without 16 A fuse!) : 16 A continuously, 20 A 5 min 4) With zero adjustment without zero adjustment 35 + digits RM 14 ... 16: 12 A 5 min, 16 A 30 s www.ziegler-instruments.com | 15...
- Page 12 300V = 150 V ... 1000 V eff rms eff rms 8) On the range V square wave signal positive on one side 15 ... 5 , f const not 163.84 Hz or integral multiple Without sensor. www.ziegler-instruments.com | 15...
- Page 13 16 A / 600V; 10mm x 38mm; rating 100 kA with 600V across the device under test ohmic load protects the A and A ranges upto 600 ; V see .18" maintenance for manufacturers and types of fuses " www.ziegler-instruments.com 13 | 15...
- Page 14 1000 V 60 <dB Normal Noise quantity V mode valueofthemeasuringrange at atime 50 <dB interference 1000 . , 50 Hz, 60 Hz. voltage sinusoidal 500 V 1000V 1000 2000 3000 Noise quantity max 1000 . 110 <dB www.ziegler-instruments.com 14 | 15...
- Page 15 The multimeter operates with a V flat cell battery according to IEC F 19. Servicing 22 or IEC 6 LR 61 or with a suitable NiCd storage battery. When you need service please contact ZIEGLER INSTRUMENTS Schnepfenreuther Weg 6, D-90425 Nürnberg, Germany. (+49)(911) 38 492 45 info@ziegler-instruments.com T E L .
Need help?
Do you have a question about the RM Series and is the answer not in the manual?
Questions and answers