Advertisement
How to Operate
Operation On/Off
ON/OFF
SPEED
Speed 1~7
OSC
SWIVEL
TIMER OFF
Set TIME OFF
COMFORT
Set Comfort mode
Set TIME ON
TIMER ON
Ready
Insert the power plug into a 120V power point.
Start
Switch on by pushing
[ON/OFF]
button.
(The fan starts at the speed "1" )
Pushing
[ON/OFF]
button again to end the operation.
Speed setting
Select your preferred fan speed by pushing
P6-14606
Speed 2 – Speed 3 – Speed 4 – Speed 5 – Speed 6 – Speed 7 – Speed1
(Each press will change the speed and the speed indicator lamp)
Timer setting
Select at your desired time (1-2-4 Hour) to be standby mode by pushing
[TIMER OFF]
button.
1 – 2 – 4 – stop timer off function
(Each press will change the time and the time indicator lamp)
After the time you set, the fan will become standby mode automatically.
Select at your desired time (2-4-6 Hour) to start your fan by pushing
ON]
button.
2 – 4 – 6 – stop timer on function
(Each press will change the time and the time indicator lamp)
After the time you set, the fan will start to operate at speed 2 automatically.
And the fan will stop after 4 hours, if you don't press the TIMER OFF button when
in operation.
Osc setting
To swivel by pushing
Comfort mode setting
Set comfort mode by pushing
canceled.
(Each press will change the mode and the comfort indicator lamp)
CAUTION:
Do not cover remote control reception area.
●
(If there is any obstacle between the reception area and the remote control, the
remote control will not work)
Handle remote control carefully. Do not drop, step on, or spray water on the
●
Remote control.
(May damage or break.)
[SPEED]
button.
[OSC]
button. And push again to end the function.
[COMFORT]
button. Push it again, Comfort mode is
P7-14606
[TIMER
P8-14606
Advertisement
