Sun Microsystems Dual Port 4x IB Host Channel Adapter PCI-ExpressModule User Manual page 35

5. Verify that the IB-EM ports are up and the driver is attached.
To do this, type the following command:
# dmesg | grep tavor
The output shows recently printed system diagnostic messages that have the string
tavor in the message. Included in the output is a message that tells whether the port
is up or down. See the information in
Feb 17 20:30:42 hostname px_pci: [ID 370704 kern.info] PCI-device:
pciex15b3,6278@0, tavor0
Feb 17 20:30:42 hostname genunix: [ID 936769 kern.info] tavor0 is
/pci@7c0/pci@0/pci@8/pciex15b3,6278@0
Feb 17 20:30:42 hostname tavor: [ID 548581 kern.info] tavor0: FW ver:
0004.0007.0190, HW rev: a0
Feb 17 20:30:42 hostname tavor: [ID 827127 kern.info] tavor0: MT23108 Sun
Microsystems InfiniBand HCA (0x0003ba0001001c18)
Feb 17 20:30:45 hostname genunix: [ID 979957 kern.info] NOTICE: tavor0: port 1 up
Feb 17 20:30:45 hostname genunix: [ID 611667 kern.info] NOTICE: tavor0: port 2 up
Feb 17 20:30:58 hostname genunix: [ID 408114 kern.info]
/pci@7c0/pci@0/pci@8/pciex15b3,6278@0 (tavor0) online
in the following example:
bold italics
Chapter 2 Installing the Adapter 7