Page 3
● Use only the voltage specified on the rating plate of the fan. ● Do not cover or restrict airflow to the inlet or exhaust grilles in any manner as the appliance may overheat and become a fire risk. ● NEVER cover the fan : this may cause fire. ●...
Page 4
● Do not connect the appliance to the mains voltage until completely assembled and adjusted. ● Switch off and use handles where provided when moving. ● Always operate on a flat horizontal surface. ● Do not remove plug from power socket until the appliance has been switched off.
Page 5
● Do not operate the fan near to curtains or any other fabric which could be sucked into the fan unit. ● When the fan was assembled, the fan grill shall not be taken off anymore - Prior cleaning unplug the fan - The fan grill shall not be dissembled/opened to clean the fan blade - wipe the fan enclosure and fan grill with a slightly damp cloth...
Page 6
KNOWING YOUR MACHINE 1.Control panel 2.Body 3.Screw 4.Front base 5.Rear base 6.Base screw nut 7.Power cord 1. To have oscillation, press down the OSC button when the fan is working. 2. TO stop the oscillation, press the button again. HIGH...
Page 7
Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.
Need help?
Do you have a question about the FZ10-17K and is the answer not in the manual?
Questions and answers