Advertisement
INSTALLATION INSTRUCTIONS
WARNING:
INSTALL PRODUCT IN ACCORDANCE
WITH LOCAL AND NATIONAL ELECTRICAL
INSTALLATION INSTRUCTIONS MAY
CODES.
RESULT IN DEATH OR SERIOUS INJURY
7
ELECTRICAL CONNECTIONS
NOTE
See Wiring Details and
Wiring Layouts for
more information
Connect luminaire power cable to leads from power
supply. See attached power supply instruction sheet.
Make all electrical connections as per any local and/or
NEC codes. Repeat for all luminaires.
Insight Lighting
Phone: (505)345-0888
*Insight Lighting reserves the right to make changes to this product and related installation instructions at any time without prior notice.
MEDLEY X
WARNING:
FAILURE TO COMPLY WITH THE
READ ALL SAFETY INSTRUCTIONS
INCLUDED WITH LUMINAIRE BEFORE
8
ATTACH CANOPIES
Slide canopies down mounting arms toward mounting plates. Magnetic attachment
will occur.
Fax: (505)345-3838
WARNING:
THIS IS AN ELECTRONIC DEVICE. CARE MUST BE TAKEN
DURING STORAGE AND HANDLING. STORE IN A CLEAN, COOL
AND DRY LOCATION. ELECTROSTATIC DISCHARGE (ESD) CAN
HARM THIS PRODUCT. AVOID STATIC DISCHARGE WHILE
INSTALLING LUMINAIRE.
Web: www.insightlighting.com
EAM-EXTENDED ARM
REMOTE
MULTIPLE MOUNT
MULTIPLE
UP & DOWNLIGHT
CONFIGURATIONS
CAUTION:
HANDLING THIS PRODUCT.
9
FINAL ADJUSTMENT
To adjust luminaire, loosen (4x) set screws. Rotate
luminaire to desired rotation. Set rotation by tightening
(4x) set screws. DO NOT OVER TIGHTEN.
WHITE & STATIC
COLOR
ACTIVE WHITE
COLOR CHANGING
CAUTION:
INSIGHT LIGHTING IS NOT RESPONSIBLE FOR THE
STRUCTURAL INTEGRITY OF THE BUILDING TO
SUPPORT THE LUMINAIRE. ADDITIONAL BACKING
MAY BE REQUIRED.
NOTE
Hand tighten screws to
15in. lbs. Torque,
Max.
PAGE 1 OF 1
IS11208-1.DWG 06MAR19 JW
REV N/C
Advertisement
