Hyundai PALISADE 2020 Quick Reference Manual page 164

Hide thumbs Also See for PALISADE 2020:
Table of Contents

Advertisement

Lane Safety
(if equipped)
When a danger of lane deviation is detected, you can set to
generate warning sound or help you control the vehicle.
• Lane Keeping Assist: Helps prevent lane deviation by
generating warning sound and helping you control the
vehicle if any suspected lane deviation danger.
Ý
Warning
The Lane Keeping Assist (LKA) system is not a substitute for
safe driving practices, but a convenience function only. It
is the responsibility of the driver to always be aware of the
surroundings and steer the vehicle.
Ü
Caution
When the lanes are not recognized well by front cameras,
always check the surroundings because the lane keeping
assist system may not work properly.
• Lane Departure Warning: When a danger of lane deviation
is detected, the warning sound is generated.
• Off: Turns off the lane safety function.
9-6
Blind-Spot Safety
(if equipped)
You can set to generate warning sound and help you control the
vehicle in case of a danger of collision with a vehicle in the rear.
• Blind-Spot View: Displays the blind spot view on the
instrument cluster when the turn signal lamp is blinking.
• Safe Exit Assist: Helps prevent collision upon getting off by
generating warning sound and helping the door open control
if any suspected blind spot collision danger.
Ü
Caution
• The Safe Exit Assist (SEA) system may not operate
normally when a vehicle is coming rapidly two lanes over
from your vehicle or a vehicle is approaching at a fast
speed from the rear in the lane next to your vehicle.
• The Safe Exit Assist (SEA) system may not operate
normally if there is any vehicle or obstacle at the rear
area of your vehicle.
• The Safe Exit Assist (SEA) system may be activated later
than normal or may not operate normally if a vehicle is
approaching fast from the rear of your vehicle.
• The Safe Exit Assist system may not operate when the
blind spot detection system malfunctions as follows:
- The blind spot collision warning message appears on
the instrument cluster.
- The sensors of the blind spot detection system are
contaminated or covered.
- The blind spot detection system does not generate
warning or generates a wrong alert.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents