OSD warning messages
When the monitor does not support a particular resolution mode, the following
message is displayed:
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. Recommended mode is 3840 x
2160.
Before the DDC/CI function is disabled, the following message is displayed:
When the monitor enters the Standby Mode, the following message appears:
If you press any button other than the power button, the following messages will
appear depending on the selected input:
Dell 32 Monitor
The current input timing is not supported by the monitor display.
Please change your input timing to
Monitor specifications
Dell 32 Monitor
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Yes
Dell P2418HZ
Dell 32 Monitor
Going into Standby mode...
3840x2160, 60Hz
or any other
for the Horizontal and Vertical
No
S3221QS
Operating your monitor
S3221QS
│
55