Advertisement
Available languages
Available languages
3. How to use the keyboard
After successful installation of the keyboard you can now enjoy the freedom of choosing a location of up to
approx. 5-7 m distance from the PC. A deviation in operating range can be caused, as mentioned earlier, by
metallic dividing walls, other computer cases, monitors, ZIP drives, loudspeakers, switching power supplies
etc., but also by different loading capacity of the batteries. For this issue the status LEDs on the top side of
the keyboard shows you information about the current operating condition.
3.1 Meaning of status LEDs
• Pairing-LED
Indicates that the keyboard is in Pairing-Mode with the USB receiver, in other words
the manual implementation of a new synchronisation to achieve a shared "radio
channel" (ID). The light goes out after successful synchronisation.
• Transmitting-LED
Indicates that during keyboard or touchpad operation all input information have been
sent out successfully per radio transmission from the keyboard.
• Battery Low-LED
Indicates that the load condition of the batteries is below 2.4 Volt. It flashes until a new
battery has been inserted or until the battery has been completely used up. Besides
that it flashes only when the keyboard is not in Sleep-Modus (idle state).
3.2 Special operation modes of the keyboard
• Sleep-Mode
When 30 minutes happens no input in your keyboard respectively touchpad, the keyboard turns
automatically into Sleep-Mode (idle state) to save battery capacity.
• Wake up-Mode
For
activating
the
(not the left or right mouse function key of the touchpad or the touchpad itself!).
• Reconnect-Mode
After
reactivation
Depending
on
environmental
between less than 1 second up to few minutes.
Version 1.1 (2009/07/28) ● © 2009 by MaxPoint Handelsges. mbH
keyboards
from
the
keyboard
connects
conditions
Sleep-Mode
press
automatically
again
for
the
radio
transmission
- 13 -
any
key
on
your
with
the
USB
it
needs
keypad
receiver.
for
that
Advertisement
