Advertisement
Available languages
Available languages
Hardware Installation
Please connect the cables to the panel body as shown above.
There are three cables need to be connected to the panel body.
The black 14-pin connector on the left should connect with the
correspondent 14-pin USB extension cable (attention: this
connector has been particularly designed and can be connected
only in the proper way);
The white 4-pin connector besides should connect with the
correspondent 4-pin USB＆1394 (2 in 1) extension cable (attention:
this connector has been particularly designed and can be
connected only in the proper way)
The light yellow 6-pin connector on the right should connect with
the correspondent 6-pin audio extension cable (attention: this
connector has been particularly designed and can be connected
only in the proper way).
The red SATA cable and the RCA extension cable is fixed on the
panel body.
3.
Fixing the DA-70138-2 Panel Body
Advertisement
