1. Operating Control Panel Timer Memory 1 / 2 / 3 Memory/Screen lock (unlock) Display Downward movement Indicator light Upward movement Operation Instruction: Note: If the control panel is used for the first time, please reset the system before any normal operation.
Page 3
Height Adjustment: Press and hold the up/down button to lift/lower the desk to your desired height. Press and release the button to lift/lower the desk precisely. Timer: Press the “T” button to set the period of time to inform users to stand up. Each press of the “T”...
2. Troubleshooting Guide In Front This repair guide intends to help you identify and solve the minor problems caused by unusual operation of the electric system of our sit-stand desk. If the following guides can’t help solve the problems, please contact your point of purchase for service.
Page 5
connection then reconnect the avoidance error power system ••• Collision Remove all the objects Fatigue Mode Pres M+Up+Down for avoidance within the range of 2-15 seconds until the system has motion dots disappear activated The control Please make sure the Collision or Press UP and DOWN box isn’t...
Page 7
• To Adjust Maximum Height Limit (72~128cm/28.3”~50.4”) Step 2: Programming Press “M” and the Current Maximum Height Limit (“128” by default) is displayed. Press “UP”/“Down” to set your desired height. Note: Note: For display range reason, the display will not count the number immediately as you press the up and down buttons under the setting of metric system.
Page 8
Hereby Assmann Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address. www.assmann.com Assmann Electronic GmbH Auf dem Schüffel 3 58513 Lüdenscheid Germany...
Need help?
Do you have a question about the DA-90392 and is the answer not in the manual?
Questions and answers