Download Print this page

Mattel Tyco R/C Waveripper 37553 Owner's Manual page 3

Advertisement

BATTERY INSTALLATION (and removal)
BATTERY INSTALLATION (and removal)
Please refer to drawings below.
Fan
1.
2.
Battery
Cover
Battery
Compartment
Estimated run time for this vehicle: 10-15 minutes
10-15 min.
10-15 min.
Transmitter
Transmitter
1.
Install one 9-volt (6LR61) battery with polarity (+/-) as shown inside battery compartment.
2.
The transmitter battery will last much longer than the run time of the TMH FlexPak
rechargeable battery pack.
SPECIAL CONTROLS & DRIVING MODES
SPECIAL CONTROLS & DRIVING MODES
FORWARD
RIGHT TURN
4
3
3.
3
ON/
OFF
Switch
REVERSE
WATERWHEEL LEFT
VEHICLE
VEHICLE
1.
Open vehicle latches (you may want to use a coin to turn the latches).
2.
Lift off vehicle top section as shown. The ON/OFF switch and the
battery compartment are located underneath. Make sure the vehicle
switch is in the OFF position. Open battery compartment latches
and lift off battery compartment cover.
3.
Fold the FlexPak battery pack as shown, with the metal battery con-
tacts as shown. Install the battery pack in the battery compartment as
shown.
4.
Replace the battery compartment cover and turn battery compart-
ment latches to secure. Turn vehicle switch to the ON position.
5.
Replace vehicle top section and secure latches.
Never operate your vehicle without the battery compartment cover
AND the vehicle top section properly closed and latched!
CAUTION: Keep fingers, hair and loose clothing away from the
battery compartment fan while the vehicle is switched ON.
LEFT TURN
WATERWHEEL RIGHT

Advertisement

loading

This manual is also suitable for:

Tyco r/c waveripper 37554