Ios User Guide; Functions - Hearth and Home Technologies IntelliFire App Installation Instructions & User Manual

5. iOS User Guide

Introduction
This user guide serves as a quick reference to the
IntelliFire app.
MAIN SCREEN - iOS MAIN SCREEN - iOS
This is your main screen. An outside air temperature will
be displayed at the top of your screen. This temperature
reflects the postal code entered during set up.
This main screen also provides:
1. Location and name of the appliance controlled by this
device.
2. Status of the Flame function. If flame function is ON,
then the flame level will be displayed.
BRAND NAME
FLAME
TEMPERATURE
CONTROL
Figure 1 Main Screen
9 Hearth & Home Technologies • IntelliFire App Installation Instructions & User Guide • 2326-985 • 7/20
IntelliFire
TIMER
OTHER FEATURES
App - iOS
®
User Guide
FUNCTIONS - iOS FUNCTIONS - iOS
Flame
Turn Flame On/Off
Move the slider switch to the right to turn ON the Flame, to
the left to turn OFF the flame. When the flame is ON the
slider switch color will change.
Flame Height
You can set the flame height with the (+) / (-) buttons for
your desired flame height level to affect the ambiance
and control the heat output. Each press of the button
will change the flame height one level.
Your appliance will remember the previous flame height
setting and adjust the flame to that level 10 seconds after
turning the flame on. Each level will take 4 seconds to
transition.
Note: It is recommended to allow four seconds between
each command to change the flame height. If the flame
height adjustments are made too quickly, the app display
may not accurately display flame height status.
BRAND NAME
Figure 2 Flame
FLAME
HEIGHT
FLAME HEIGHT
ADJUSTMENT
ON/OFF
FLAME