Dvb-T Operation - Seg ONE VP 118 Instruction Manual

DVB-T OPERATION

Press DVD/DVB button on the remote control to select DVB-T mode.
1. First time installation
If you are using the unit for the first time, an Initial Installation menu will be displayed
to guide you through the first time installation (Picture 1). After selecting "YES", a new
frame appears, shown in Picture 2, requesting the area, OSD language. Use the
cursor buttons to choose the right options. Then select "NEXT" and press
/
ENTER button on the remote control to go the next picture, shown in Picture 3. Then
select "YES", it begins to auto searching. Wait to complete the scanning. In case you
want to stop the scanning, press the STOP button.
2. The Main Menu
Press the SETUP button to enter the main menu. Press the SETUP button again or
press RETURN button to exit the menu. There are Channel Guide, System Config,
Installation and Game four items to be selected and set.
2.1 Channel Guide
2.1.1 TV Channels
When select TV channels item and press ENTER to enter the menu. The channels appear
on the left of the menu and a preview window appears on the right. From here, the channel
can be changed by using the
Picture 1
Picture 3
/ buttons and ENTER to start viewing and
13
Picture 2
Picture 4
/ ,
/