4) VIDEO SETUP
When you open the VIDEO SETUP menu, you will see the following picture:
You can use the
value of the brightness, contrast, hue, saturation and sharpness.
5) DIGITAL SETUP
When you open the DIGITAL SETUP menu, you will see the following picture:
*OP MODE: to set the operating modes for Dolby Digital decoder, there are LINE OUT
and RF REMOD to be selected.
* DYNAMIC RANGE: you can adjust the dynamic range between 2/8. 4/8, 6/8, FULL.
Choose this setting to adjust the line out ratio and get different effect. If adjusting to
FULL, the audio signal peak value will be the minimum, while adjusting to OFF,
maximum.
*DUAL MONO: there are STEREO, MONO L, MONO R and MIX MONO to be selected.
USB / MEMORY CARD OPERATION
When you select the USB / MEMORY CARD mode, the operation is the same with DVD
operation.
For example, when entering into the USB mode, the picture will appear.
You can select the audio/photo/video/E-book item to play.
buttons on the remote control or on the unit to adjust the
/
12