26
5.
Programming
5.1
BUS-2 user address
5.2
DIP switch 8
Do not change the setting (ON) made by the factory!
5.3
Radio revision mode
DIP switch 7 is used to switch on the radio revision mode, see information in chapter 4.
OFF
DIP switch 7
ON
Mounting and Connection Instructions RF BUS-2 wireless receiver
The DIP switches on the PCB are for coding the BUS-2 user address.
Possible address range: 1 to 63
The illustration at the right shows some examples.
The individual codes can be found in the programming protocol of the intrusion
detection control unit.
The user name is automatically allocated in the central control unit programming
by the corresponding function.
Switch for radio revision mode
Radio revision mode switched off - normal BUS-2 operation
Radio revision mode switched on