Multilaser Sense User Manual page 48

4. Description of main function operation
setting.
Main source setting
• I n main source state, click on the setting key to enter the setting interface shown in Figure 17.
Then click on to enter the interface to set relevant options of main source.
• P For example, in blue-tooth state, click on the setting key to enter the setting interface shown
in Figure 17. Then click on to enter the interface to set relevant options of blue-tooth main
source, as shown in Figure 21.
General setting
• U nder any interface, click the setting key to enter the setting interface shown in Figure 17. Then
click on to enter general setting interface, as shown in Figure 22.
47