Advertisement
Antenna Installation
1.
Find a mast (metal pole) that is longer than five meters and 25 to 50mm (1" to
1.9") in diameter.
Assemble the 2 antenna bodies and six whips.
2.
Connect brackets to guide pipe, sliding the brackets on from the bottom.
3.
Fit the guide pipe and bracket on mast firmly. Fit the guide pipe and bracket
on mast firmly.
4.
Thread the coaxial cable through the guide pipe and connect one end of the
coaxial cable to the antenna.
5.
Connect the other end of the coaxial cable to the base station.
Note: Use only EnGenius antenna and cable.
connector has reverse thread that only works with cables supplied by EnGenius.
Mast
Bracket
Guide pipe
whip x 6
The base station antenna
Screw
Guide pipe
Advertisement
