Maximum Recovery Tank Water Level Alarm - Kränzle SSM 430 Use And Maintenance

10.1.e - Maximum recovery tank wa-
ter level alarm (Fig. 14)
If during the use of the machine the vacuum
stops and the display shows the symbol "
" this means that the level of the liquid in
the recovery tank has reached its maximum
level.
Go to the water drainage station and drain
the recovery tank as shown in the relative
paragraph.
- In order to disable the alarm, stop and re-
start the machine.
NOTE:
For the proper operation of the level sensors
it is required to properly clean the inside of
the tank (14 Fig. 14).
EN-13
EN