Table of Contents
Advertisement
Available languages
Available languages
EN
-
Remove heater from its carton and unwind the cord to its full length.
-
Place heater on a firm level surface, in a stable upright position.
-
Insert Plug Into Mains Socket.
Make sure that the supply voltage corresponds with the data
indicated on the appliance nameplate.
SELECTING FUNCTIONS
- Thermostat knob (4)
Rotate thermostat control (4) clockwise or counter-clock-
wise to achieve desired room temperature.
- Power selection knob (5)
Rotate the control (5) clockwise or counter-clockwise to
set the functions:
Switching off
Switching on with flame effect
Minimum power (750W)
Maximum power (1500W)
The flame effect function is independent of the heating function. This means
you can turn on the flame effect without turning the heater on.
52
USE
HET 1099
4
5
Advertisement
Table of Contents
