1.MS-1-D.7
Hood (Keyboard)
1)
Peel off the Rubber (Screw) (two places).
3)
Hood (Keyboard)
Turn over the Hood (Keyboard) to the rear side.
* The detents (10 places) are engaged.
Rubber (Screw)
Keyboard
2)
Remove the two screws.
4)
Disconnect the FFC and the Harness.
*FFC --- Slide the lock lever upward and release the lock.
Harness --- Pull out it upward.
Confidential
Screw:B3
Keyboard
FFC
Harness
BX Series