Sony BX Series Assembly And Disassembly Manual page 30

1.MS-1-D.27
Mother Board -3
[MA]
6)
4
2nd Model
Mother Board
Peel off the Kapton Tape (one place).
8)
Side-B of the Mother Board
Mother Board
Turn over the Insulator (PCB), and disconnect the Harness
(RJ45+RJ11) in the direction of the arrow.
* Then remove the Mother Board. (1st Model)
Kapton Tape
Insulator (PCB)
Harness (RJ45+RJ11)
[MA]
4
7)
Mother Board
Raise the Mother Board to the right side while
releasing the connector portion from the Housing.
[MA]
9)
4
2nd Model
Turn over the Mother Board toward the rear.
* As the Harness is connected to the rear of the Mother Board,
be careful not to damage the Harness.
Confidential
Connector Portion
Mother Board
Harness
BX Series