Shindaiwa M2500 Owner's/Operator's Manual
  1. Manuals
  2. Brands
  3. Shindaiwa Manuals
  4. Power Tool
  5. M2500
  6. Owner's/operator's manual

Shindaiwa M2500 Owner's/Operator's Manual

Multipurpose tool carrier
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SHINDAIWA OWNER'S/
OPERATOR'S MANUAL
M2500 MULTIPURPOSE
TOOL CARRIER
WARNING!
Minimize the risk of injury to yourself and others! Read this manual and familiarize yourself
with the contents. Always wear eye and hearing protection when operating this unit.
Part Number 65009-94310
Rev. 10/02
M2500

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M2500 and is the answer not in the manual?

Questions and answers

Related Manuals for Shindaiwa M2500

Summary of Contents for Shindaiwa M2500

  • Page 1 SHINDAIWA OWNER’S/ OPERATOR’S MANUAL M2500 MULTIPURPOSE TOOL CARRIER M2500 WARNING! Minimize the risk of injury to yourself and others! Read this manual and familiarize yourself with the contents. Always wear eye and hearing protection when operating this unit. Part Number 65009-94310...

  • Page 2: Table Of Contents

    Do not use operator, you’ll soon discover for CAUTION! attachments not approved by yourself why Shindaiwa is simply in a Shindaiwa for use on this unit. A statement preceded by the word class by itself! “CAUTION” contains information...

  • Page 3: Safety Labels

    WEAR PROTECTION devices when operating this unit. are available from your local autho- NEVER operate the engine when rized Shindaiwa dealer. transporting the unit. Make sure cutter safety guards are in place when transporting this unit. NEVER operate the engine indoors! Make sure there is always good ventilation.

  • Page 4: Product Description

    Shindaiwa products. Specifications are subject to change without notice. Inspect Kit containing handle mounting The M2500 comes fully assembled with bracket and hardware, this owner/ the exception of the front handle. Before operator's manual and tool kit for completing the assembly, carefully routine maintenance.

  • Page 5: Assembly And Adjustments

    Assembly and Adjustments Handle Connect the Handle to Socket-head the Outer Tube. Capscrews 1. Position the handle on the outer tube as shown. See Figure 3. Throttle 2. Install the mounting bracket with the Assembly socket head cap screws. Tighten the Handle screws finger-tight ONLY at this time.

  • Page 6: Installing A Tool Attachment

    Latch Protector Carrier and the Tool Assembly on a Assembly (extended) (lowered) clean, flat surface so that both assemblies fit end to end. The M2500 Latch assembly should be facing up and the Locking tool assembly should be positioned Hole with the locking hole in the tube end facing up.

  • Page 7: Engine Fuel

    C4 type engines, and should never fuel tank and/or fuel tank cap than 30 days and oil with fuel be used in your Shindaiwa engine. are damaged. stabilizer is not used, it should first be NEVER smoke or light any fires...

  • Page 8: Stopping The Engine

    4. Carburetor fuel mixture adjustments XST015 idle speed cannot be adjusted by are preset at factory and cannot be Idle Adjusting the procedure described here, Figure 16 serviced in the field. Screw return the trimmer to your Shindaiwa dealer for inspection.

  • Page 9: Checking Unit Condition

    Make sure all hooks and adjusting devices are secure. NOTE: Although not required for use with M2500 Multipurpose Tool Carrier, an optional shoulder strap can increase operator comfort during extended periods of operation. Figure 17...
  • Page 10 The NGK CMR6H also meets the It is highly recommended that this is resistor type spark plug of the requirements for electro magnetic done by a Shindaiwa-trained service correct heat range. Set spark plug compliance (EMC). technician. electrode gap to 0.024-0.028 inch...

  • Page 11: Long Term Storage

    5. Inspect the cylinder exhaust port for Muffler any carbon buildup. Bolts IMPORTANT! If you note excessive carbon buildup, consult with an authorized Shindaiwa servicing dealer. 6. Reassemble the spark arrester, Spark Arrester muffler and engine cover in the Screen reverse order of disassembly.

  • Page 12: Troubleshooting Guide

    Troubleshooting Guide ENGINE DOES NOT START What To Check Possible Cause Remedy Faulty recoil starter. Consult with an authorized servicing dealer. Does the engine crank? Fluid in the crankcase. Consult with an authorized servicing dealer. Internal damage. Consult with an authorized servicing dealer. Loose spark plug.
  • Page 13 Troubleshooting Guide (continued) ADDITIONAL PROBLEMS Symptom Possible Cause Remedy Clogged air filter. Clean the air filter. Poor acceleration. Clogged fuel filter. Replace the fuel filter. Lean fuel/air mixture. Consult with an authorized servicing dealer. Idle speed set too low. Adjust: 3,200 ( 300) rpm (min Switch turned off.

  • Page 14: Emission System Warranty

    You are responsible for presenting your small off-road as the carburetor, the ignition system and, if equipped, the engine to an authorized Shindaiwa Dealer as soon as a catalytic converter. These components are specifically listed problem exists. The warranty repairs should be completed below.

Table of Contents