Advertisement
SUPPORT
TB-ET2750
INKJETBIZ
103-19
b. Position the top of the ink bottle along the slot in
front of the filling port, then slowly stand the bottle up
to insert it. Wait for ink to fill the tank.
Do not squeeze the bottle. Ink flows into the tank and
stop automatically when the ink tank is full.
c. Remove the ink bottle once the ink tank is full and
securely close the ink tank cap.
Repeat steps 3a-3c to fill the rest of the ink tanks, close the ink tank cover when finish.
4. Connect the power cord to the back of the product and to an electrical outlet. Raise the con-
trol panel, then press the power button to turn on the product.
(Do not connect to the computer
yet)
5. Press up or down arrows to select your language on the LCD
screen. Next, press the OK button. When the message "Start
Here" appears on the LCD screen, press the OK button. On the
next screen, press and hold the OK button for 3 seconds.
When the message to "Start Initialization" appears on
the LCD screen, press the start button to start charg-
ing the ink. Ink charging takes approximately 7 min-
utes. A message will appear when ink charging is com-
plete.
6. Connect the printer to the PC, install your printer driver and
ICC. Load the media and you are ready to print.
Call Us: a (408) 394-7595 • www.inkjetbiz.com
Advertisement
