Inserting the transmitter batteries
1.
Slide the battery lid
downwards to open the
battery compartment.
Charging the flight battery
LED
LiPo battery
3.7 V 250 mAh
Charger specifications
Input: DC 5 V
Charging current: 450 mAH x 2
Full voltage: 4,2 +/- 0,03 V
2.
Insert 6 x AA batteries (not included)
with the correct polarity and replace
the battery lid.
Charging cable
Charger
Transmitter
Insert the USB plug into the USB port
on your computer. Insert the charging
plug into the charging socket on the LiPo
charger. Now insert the LiPo batteries
into the charger. The red charge LED on
the charger will light up to indicate the
charging is in process. As soon as the
red charge LED will extinguish the LiPO
batteries have been completely charged.
For safety reasons battery charging has
to be observed constantly.
15
Battery
lid