Advertisement
FAQs
?
What is the gray pushbutton on THAT-2 used for?
!
The button is used to select which audio signal will
be sent into the telephone.
OUT = talking on the handset
IN = sending audio through the RCA jack
Keep in mind that you cannot send audio into the
RCA jack and talk on the handset at the same time.
However, any audio sent into the phone can be
heard on the handset and is available on the RCA
output jack at all times.
?
I have been using my THAT-2 for recording and it
works great but when I try to send audio down
the line it won't work.
!
Several things could be causing this problem: First
you must send a line level signal into the "To Phone"
jack on THAT-2. Second, make sure the gray button
is in the "In" position. This disables the handset mic
and enables the audio input. Third, check the ABC
switch setting.
?
I have the audio "From Phone" connected to a
powered speaker. How can I get more volume?
!
The output of THAT-2 is at mic level and may need a
pre-amp before being connected to your speakers.
7
Advertisement
