Quick To Use - Ebyte E90-DTU User Manual

Hide thumbs Also See for E90-DTU:

Table of Contents

Chengdu Ebyte Electronic Technology Co., Ltd.

Software window description

Num

1：Select the current baud rate and parity bit of the module and the corresponding port number, then open the serial port. You

must make the module work in configuration mode and select the correct serial port parameters, otherwise the operation instructions

will fail.

2 ：Click to read parameters, it prompts that the read parameters are successful, and the current parameters of the module are

displayed in the parameter area. Click Write parameters to prompt that the write parameters are successful. The parameters

selected/filled in the parameter area have been written to the module.

3 ：The parameter area is used with the "Read Parameters" button to display the current module parameters, or to modify the

parameters with the "Write Parameters" button to set the module parameters.

4：Special commands for restarting and restoring factory settings are used to reset the module and restore the module parameters

to the factory state respectively.

2.2 Quick to use

1. First install the antenna for device, then install the power supply, Radio M1 dials down, M0 is arbitrary, enter the

transparent transmission mode,The user can select the crimping method or the power adapter to supply power according

to the requirements

；

2 . Use USB to RS-232 or USB to RS-485 to connect the computer to the digital radio; hen turn on the power of the radio,

and it will automatically establish a connection with another radio. If the connection is successful, the LINK light is

always on to communicate.

Description

Serial port parameter area

Command execution area

Parameter area

Special command area

E90-DTU （2G4L27） User Manual

Table of Contents

2g4l27