Waring MG800 Instruction Book page 6

Grinder/Feeder Head
1. Attach grinder/feeder head
to motor housing.
Cutting Blade
3. Attach cutting blade on the end
of the feed screw.
Spanner
Screw Ring
5. Tighten screw ring onto the
grinder/feeder head. Use
spanner to secure screw ring.
Coarse Cutting
Plate
Cutting Blade
Screw Ring
9. Once meat has gone through
grinder, turn unit off. Remove
screw ring, coarse cutting plate
and cutting blade.
Motor Housing
5
Feed Screw
2. Insert feed screw into the
grinder/feeder head.
NOTE: Make sure feed screw is
inserted all the way in or cutting
blade will not fit.
Coarse Cutting
Plate
4. Place the coarse cutting plate
in the grinder/feeder head.
Pusher
6. Place large die cast hopper
onto of grinder/feeder head.
7. Turn unit On.
8. Using pusher, slowly feed meat
cubes.
NOTE: Meats can be seasoned
before or after grinding.
Grinder/Feeder Head
Die Cast
Hopper