Advertisement
Quick Links
Mod Toy Cart
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
bolt
x8
Hardware Supplied
Phillips screwdriver required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
B
C
nut
dowel
x8
x4
WARNING:
Due to the small size of the hardware and the sharp
points of the screws, they are potentially hazardous.
Keep all assembly parts and packaging materials out of reach of
children
Retain packaging information for future reference
Adult assembly required
Recommended age 18 months +
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mocka Mod Toy Cart
Summary of Contents for Mocka Mod Toy Cart
- Page 1 Retain packaging information for future reference Phillips screwdriver required. Adult assembly required For quicker assembly, we recommend the use of a power drill on a low-speed setting. Recommended age 18 months + mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 2 Insert 2 x dowels (C) into panel [1]. Attach panels [2] and [3] to panel step for opposite side. [1] and secure with 4 x nuts (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 3 Insert 2 x dowels (C) into panel [1]. Attach panel [1] to panels [2] and [3] and secure with 4 x nuts (B). Tighten with a screwdriver. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Need help?
Do you have a question about the Mod Toy Cart and is the answer not in the manual?
Questions and answers