Advertisement
Quick Links
Kids Steel Wheelbarrow
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
screw
nut
x4
x4
Hardware Supplied
Flathead screwdriver required.
ALL nuts and bolts must be checked and tightened
tight to ensure safety.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
C
spanner
x1
Warning: Small parts are used to assemble the Kids Steel
Wheelbarrow and should only be assembled by an adult.
Keep all assembly parts away from small children.
Suitable for ages 12 months +
1
Advertisement
Summary of Contents for Mocka Kids Steel Wheelbarrow
- Page 1 ALL nuts and bolts must be checked and tightened Wheelbarrow and should only be assembled by an adult. Keep all assembly parts away from small children. tight to ensure safety. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 2 Next attach one wheelbarrow leg piece and one handle rod to the shown. Repeat step for the second handle. wheelbarrow tray using 2x bolts (A) inside the tray and fasten securely with 2x nuts (B). Tighten with spanner (C). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 3 Slot the second handle piece on to the wheel axle and position in place at the end of the handle rod as shown. over the holes in the underside of the wheelbarrow tray mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 4 2x bolts (A) inside the tray and fasten securely regularly check these are tight to ensure safety. You’re done, enjoy! with 2x nuts (B). Tighten with spanner (C). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...