Warning Lights; Action Buttons - Tommee Tippee perfect prep machine Instructions For Use Manual

J
K
L
M
N
As with any other method of making up a feed, it's essential that good hygiene practices are observed in the use
and maintenance of your Perfect Prep machine. Ensure your hands and all surfaces that come in to contact with
the machine and its components are clean, and that the unit is away from direct sunlight and heat sources.
REGULAR CLEANING: For hygiene and safety reasons you should clean your unit on a regular basis. We recommend you carry
this out at least every 4 weeks, whenever you replace your filter or if the machine has been unused for a period of 7 days.
1
1
Place a container under the
dispenser spout to capture the water
used to clean the system (ideally at
least 1.8 litre capacity).
5
5
Press the cleaning mode button and
hold for 2 seconds. The cleaning
mode light will illuminate.

WARNING LIGHTS

CHANGE
FILTER
WATER TANK
HOT
WATER LEVEL
LOW
DE-CALC /
DE-SCALE
CLEANING
MODE
2
2
Plug in the unit, the tank empty
warning light will illuminate.
6
6
Allow the cycle to fully complete with
boiled water dispensing into the
container that you placed underneath
during step 1.

ACTION BUTTONS

CLEANING
O
MODE
P
SET UP
3
3
Fill the water tank with
boiled water.
7
7
The tank empty warning light will
illuminate once the water has
flushed through the system.
FILTER
VOLUME
RESET
DE-CALC /
Q
DE-SCALE
4
4
freshly Wait for the tank empty warning
light to go out. The water tank hot
light will illuminate.
8
8
Discard the contents from the
container used and place it back
under the dispenser spout.