LEAD dynamic WCC Operating Manual page 8

ENGLISH
3
Control
3.1 ON/OFF
Press one of the buttons 1-4 for more than 2 sec-
onds to switch the luminaires you have assigned to
this zone on or off. A blue light signals a switched on
zone and a yellow light signals a switched off zone.
You can assign any number of luminaires to a zone.
3.3 Control colours
Change the colour of your luminaire by selecting a
zone 1-4 and then swiping over the colour wheel.
LEAD ENERGY AG Am Stadtbad 37 45219 Essen-Kettwig
> 2 sec.
Subject to errors and amendments
3.2 Dimming
Dim your luminaire by selecting one of the buttons
1-4 and then pressing the multi-function button
until you have reached your dimming level.
3.4 Chaser light
Start one of ten chaser light programmes for your
luminaire by selecting them using one of buttons 1-4
and then pressing briefly on the chaser light button.
If you switch on and off again, the next programme
starts. You can change the speed of the chaser light
by holding this button down for longer.
Information / Technical support: www.lead-energy.com