Adjustments; Steering Levers; Tilt-Up Deck Adjustable Stop - Walker MT, MTL, MTEFI, MTLEFI Owner's Manual

Maintenance Instructions

ADJUSTMENTS

Steering Levers

An adjustment range of approximately 3 inches is
available on the steering levers - the levers can be
adjusted forward or aft depending on the arm length
of the operator. The levers can be adjusted by loos-
ening the locknut at the pivot point and the locknut
holding the lever in position in the adjustment slide.
Adjust levers into most comfortable position and
tighten both locknuts.
Locknut
(Position)
Steering Lever Adjustment
Adjustment
Slide
Locknut
(Pivot Point)

Tilt-Up Deck Adjustable Stop

When the carrier frame hinge joint is properly adjust-
ed, the deck lock levers should move in and out of the
engaged and disengaged positions freely. Adjust-
ments are made by loosening the jam nut and tight-
ening or loosening the set screws on the Deck Mount
Pivot Brackets. Retighten the jam nut when the ad-
justment is complete.
Jam Nut
Set Screw
Tilt-Up Deck Adjustable Stop
ADJUSTMENTS
83