Diamondback RECOIL Unpacking And Assembling page 2

Any damage caused by improper assembly is not considered a manufacturer defect
and will not be covered under warranty.
Once you have the bike box opened:
A
Remove the saddle and seatpost.
2
B. Remove the small parts box.
C. Remove the bike.
Before proceeding, make sure that all parts and material are now removed from the box.
Now that your bike is out of the box:
A Begin by detaching the wheel and removing all of the
3
packing material from the frame
B. Unpack handlebar by cutting all zipties/ removing any
packaging that may be holding parts together.
Be very careful not to cut any of the bikes shifter or brake cables while doing so.
Ill
2c