Wadia 861 Owner's Manual page 11

Wadia 861
Inverting Absolute
Phase
Turning Display
On/Off
Mute Modes
DSP-Software Mute
Output-Relay Mute
The Wadia 861 has the ability to invert absolute phase in the digital domain.
Pressing the Phase Invert button on the remote control will cause the
Wadia 861 to invert phase; pressing it again will switch the phase back to
normal. If the Wadia 861 is in Phase Invert mode, this will be indicated on
the Input Screen of the display.
By pressing the Display On or Off button, the Wadia 861 display can be
turned off completely.
If the display is turned off, it will reappear briefly whenever a Wadia 861 func-
tion button on the remote control is pressed.
The Wadia 861 has two mute modes that are automatically implemented
under different circumstances.
When the Mute button is pressed on the remote control, the Wadia 861's
DSP engine transmits a stream of zero signal level samples to the DAC
section, which results in zero output.
The Wadia 861 Compact Disc Player has mute relay connected between
the positive and negative outputs. When this relay is engaged, it connects
the positive output to the negative output, reducing the output to zero. This
relay, which produces an audible click when it engages or disengages, is
not in the music signal path. The mute relay is engaged:
1. When the Wadia 861 detects AC input level below its minimum
operating range.
2. Each time the Wadia 861 power switch is turned on.
3. When the volume control is set to zero AND the mute button on the
remote control is pressed.
When the Wadia 861 is in either Mute Mode, the Volume Screen will indicate
this by Displaying the word, "MUTE."
INDEX/FORWARD/REV: Pressing these buttons allows access to the
previous or next index point within a track that has such indexed sections.
TRACK FORWARD/REV: Pressing these buttons allows access to the
previous or next track on a disc.
SEARCH/FORWARD/REV: Pressing these buttons allows fast reverse or
fast forward access through a track.
STOP: Pressing this button while a Compact Disc is playing stops PLAY.
PAUSE: Pressing this button, while a Compact Disc is playing, suspends
PLAY. Pressing the PLAY button or the PAUSE button will resume play at
the point where the pause button was pressed.
PLAY: After a Compact Disc has been loaded into the drawer, pressing
this button plays the disc beginning with the first track on the disc or in
a sequenced program. Pressing this button while the drawer is open,
closes the drawer and begins play with the first track on the disc or in
a sequenced program.
COMPACT DISC PLAYER
11