Spirit Wacky Mole Clown Easy Assembly And Operation Instructions

Spirit Wacky Mole Clown Easy Assembly And Operation Instructions

Advertisement

Quick Links

EASY ASSEMBLY AND OPERATION INSTRUCTIONS
01181114 Wacky Mole Clown
This item, when assembled by the following instructions, should take 15 minutes to assemble.
Please follow the step by step guide and enjoy your Wacky Mole Clown!

CARE AND STORAGE INSTRUCTIONS

For best performance operate your item indoors or in a sheltered outdoor area. We also recommend that
you bring your item indoors during adverse weather (extreme cold, strong winds and/or rain). When not in
use, store this product in it's original packaging. Keep away from heat and moisture.

PARTS LIST

A. Base
B.
Support Poles (x4)
C.
Shoes
D. Pants
E.
Torso
F.
Hip Ring
G. Shoulder Frame
H. Shirt
I.
Left Arm
J.
Right Arm
K. Left Hand
L.
Right Hand with Hammer
M. Head
N. Neck Ruffle
UL Adapter *
* UL Power Adapter Spec
Input: 100 - 240VAC 50/60Hz
Output: 6.0V 1A
B
B
FRONT
A

STEP 1

NOTE: The longer end of the (A) Base goes towards the front
Now assemble (A) Support Poles together and attach to (B) Base as shown and secure by aligning
the quick-connect push buttons into the pre-drilled holes.
2013 0424
A
B
F
G
K
L
B
B
WARNING
This item is not a toy and should be used for decoration only. This item contains small parts that can be a
choking hazard. Keep all plastic and wire parts away from children. This product is intended for people
ages 14 and up.
Please read all instructions carefully before assembling. Save this instruction sheet for future reference.
C
H
M
D
C

STEP 2

Lower the (C) Shoes over the (B) Support Poles through the provided hole on the bottom of each (C) Shoe as
shown. Note the shoes are the same and can go on either leg. Now Place the (D) Pants over the support
poles as shown. Note that the stripes on the pants are on the right leg and the polka dots are on the left leg.
1/3
D
E
I
J
N
D
C
PROCEED TO PAGE 2 > >

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wacky Mole Clown and is the answer not in the manual?

Questions and answers

Summary of Contents for Spirit Wacky Mole Clown

  • Page 1 EASY ASSEMBLY AND OPERATION INSTRUCTIONS 01181114 Wacky Mole Clown This item, when assembled by the following instructions, should take 15 minutes to assemble. Please follow the step by step guide and enjoy your Wacky Mole Clown! CARE AND STORAGE INSTRUCTIONS WARNING For best performance operate your item indoors or in a sheltered outdoor area.
  • Page 2 Control box and route the power cord down towards the bottom of the frame. OPTIONAL: If you choose to use Spirit’s Step Here Foot pad (sold separately), plug the connector into the input receiving jack marked “TRY ME” on the Function Control box and route the Step...
  • Page 3 1. Plug the UL Power Adapter into a standard power outlet and adjust the settings on the Function Control Box to your liking. 2. Wacky Mole Clown has 3 operation settings which can be found on the main Function Control Box on the (D) Torso Frame:...

This manual is also suitable for:

01181114

Table of Contents